Ankom A2000I Procédure de service

Parcourez en ligne ou téléchargez le pdf Procédure de service pour {nom_de_la_catégorie} Ankom A2000I. Ankom A2000I 3 pages. Motor assembly replacement
Également pour Ankom A2000I : Procédure de service (2 pages), Procédure de service (3 pages), Manuel de remplacement (2 pages)

Imprimer la page

1. Place cardboard on a table. Lay the A2000 on

it's front. Remove the nuts that secure the clear

back panel. Remove the panel. Remove the

feet and mounting screws, then remove the

bottom panel.

3. Loosen the packing nut until it is finger loose.

5. Unplug the motor wires and set the motor out of

the way.

ANKOM Technology 2052 O'Neil Road Macedon, NY 14502 PH: (315) 986-8090 FAX: (315) 986-8091

Packing and Agitator Replacement

A2000/A2000I

[email protected]

2. Loosen the top set screw on the coupler.

4. Remove the three nuts that secure the motor

bracket in place

6. Twist and pull up to remove the agitator.

002

Service Procedure #

(Page 1 of 3) 08/05/2014