Ankom TDF Series Procédure de service - Page 6

Parcourez en ligne ou téléchargez le pdf Procédure de service pour {nom_de_la_catégorie} Ankom TDF Series. Ankom TDF Series 9 pages. Vacuum sensor installation
Également pour Ankom TDF Series : Procédure de service (7 pages), Procédure de service (4 pages)

Imprimer la page

15.

Check the forward stoke of the paddles.

Rest the squared-off end of the depth gauge against the

face of the orange gasket on Clamp Bar B just in front

of paddle #5.

b. Using either paddle #1 or #6 in your opposite hand,

rotate the paddles forward so that they extend to their

forward position.

c. Looking straight down on paddle #5, measure the

distance that the bottom edge of this paddle extends

beyond the orange gasket. This distance should be

4/32" - 5/32". If this distance is not correct contact

ANKOM Technology for instructions on how to make

an adjustment.

ANKOM Technology  2052 O'Neil Road  Email: [email protected] Phone: 315-986-8090  Fax: 315-986-8091

Paddle Bar Replacement

TDF

Depth

Gauge

Rotate

Paddles

Forward

4/32" - 5/32"

Distance

10/32"

Distance

4/32" – 5/32"

Distance

TS021

Service Procedure

Revised: 01/24/2017

pg. 6 of 9