Becom Bluetechnix Argos 3D P32X Manuel de démarrage rapide - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Becom Bluetechnix Argos 3D P32X. Becom Bluetechnix Argos 3D P32X 13 pages.

Imprimer la page
Quick Start Guide - Argos 3D - P32X
1.4.1

Connecting the power supply

To ensure, that your Argos3D–P32X works correctly, connect the 'Argos3D' to a 12-30V DC power supply
using connector (a) and wait for approximately 20 seconds until the camera boots up.
Pin assignment on the power connector (a): Pin #1: +12V to +30V, Pin#2: GND
Note
The power supply connector is protected against wrong polarity but the 'Argos3D' will not
work in case you don't use the correct polarity! If the Argos3D–P32X doesn't work please
check the power supply polarity first!
1.4.2

Connecting the Ethernet Cable

Plug in the Ethernet cable (b) and connect your Argos3D–P32X to your PC.
© Bluetechnix 2017
Figure 1-3: Argos3D–P32X with connected power supply and Ethernet cable
Last change: 20 February 2017
Version 4
Page 7 | 13