Druck PV 211 Manuel d'instruction - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Druck PV 211. Druck PV 211 9 pages. Pneumatic hand-pump
Imprimer la page
5. General Specification
INFORMATION
compatible with stainless steel, bright nickel
plated brass, anodized aluminum, phosphor
bronze (springs), nitrile rubber seals and
nylon.
Item
Specification
Pneumatic Pressure
0 to 40 bar (0 to 600 psi)
Range
Vacuum Pressure Range 0 to -0.95 bar
Dimensions (Length x
220 mm (8.7") x 105 mm (4.1") x 63
Width x Depth)
mm (2.5")
Weight (approximate)
0.65 kg (1.4 lb)
a. This value assumes atmospheric pressure at 1 bar (14.5 psi) and
varies depending on atmospheric pressure.
6. Returned Goods Procedure
If the unit requires calibration or is unserviceable, return it
to the nearest Druck Service Centre listed at: Druck.com
Contact the Service Department to obtain a Return
Authorization (Worldwide excluding USA).
In the USA, obtain a Return Material Authorization [RMA].
Provide the following information on either a RGA or RMA:
•
Product (i.e. PV 211)
•
Serial number
•
Details of defect/work to be undertaken
•
Operating conditions
6.1 Safety Precautions
INFORMATION
sources will affect the warranty and may not
guarantee further performance.
You must inform Druck if the product has been in contact
with any hazardous or toxic substance.
The relevant COSHH or in the USA, MSDS, references and
precautions to be taken when handling.
6.2 Approved Service Agents
For the list of service centers:
Druck.com
Pneumatic gases must be
(0 to -28 inHg)
a
a
Service by unauthorized
Copyright 2005 Baker Hughes Company.
English–PV 211 Instruction Manual | 3