Annovi Reverberi AR 1053 Manuel d'instruction - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Annovi Reverberi AR 1053. Annovi Reverberi AR 1053 14 pages. 550 rpm - semi-hydraulic three diaphragm pump
Imprimer la page
Safety recommendations for maintenance
Before doing any maintenance work, depressurise the water system and isolate the pump from all en-
ergy sources.
When the jobs are done, before restarting the pump, check that no tools, rags or other materials have
been left close to moving parts or in hazardous zones.
Replace any excessively worn components with original parts and use the lubricants recommended by
the manufacturer.
Frequency
Filter
Pump
Connection of pump to power
Every working day
source (pulley, belt, coupling)
Pump
Pipes and connections
Pressure accumulator (if in-
stalled)
Every 100 working
hours
Reduction gear (if installed)
Dispose of the worn-out components and lubricants in accordance with the relevant statutory require
ments.
Carry out the routine maintenance procedures specified by the manufacturer to keep the pump safe
and performing well.
I
Scheduled maintenance table
Component
Inspect filter cartridge
Checking the oil level
Inspection
Inspect mounting
Inspection
Check inflation pres-
sure
Check oil
Procedure
Reference
See "Inspecting the
filter"
See "Checking the oil
level"
See "Inspecting the
pump mounting"
See "Inspecting the
connections and pipes"
See "Checking the
inflation pressure"
See "Checking the oil
level"
-