Drummond Nanoject II Manuel d'instruction - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Drummond Nanoject II. Drummond Nanoject II 12 pages. Digital control box

Imprimer la page

Rules for Safe Operation

• For indoor use only.

• Never operate unit in an explosive atmosphere.

• Do not operate unit with a damaged cord.

• Use power source only in a standard electrical outlet.

• Do not handle power source with wet hands.

• Do not put unit or power source in water or other liquid.

• When servicing, use only identical Drummond replacement parts.

• Save these instructions.

If the equipment is used in a manner not specified by the manufacturer,

the protection provided by the equipment may be impaired. Always use

the power source that is supplied with the unit.

Connections to Power Source:

Check the power source to see that the line voltage corresponds to the voltage

indicated on the mains adapter.

If the mains adapter source and the line voltage are not compatible, the electrical

components of the Nanoject II may be damaged or destroyed.

Before each use, confirm that the mains adapter cable is not damaged, worn or

severely buckled and there are no breaks in the insulating surface. If any damage is

noted, do not use the Nanoject II until the damaged main is replaced.

Connecting to power outlet: The control box has a power source transformer

attached to the box. Plug this into your outlet using the correct adapter supplied.

There is an "on/off" switch on the side of the control box which turns on the control

box once the injector head is attached. To turn off, use the switch to turn off. If you

want to disconnect the power from the unit, merely unplug the transformer from the

wall outlet.

Power/ Current Rating: AC 100~V, 50-60 Hz, 38VA DC 12V 2A

Specifications for Usage

This unit is intended to be used to inject nanoliter quantities of sample.

This equipment is for indoor use only.

Temperature Range 10°C–35°C, Maximum Humidity 60%

FAILURE TO USE THE EQUIPMENT IN ACCORDANCE WITH INSTRUCTIONS

OR MODIFYING THE EQUIPMENT WILL VOID WARRANTIES.

CAUTION: CAREFULLY READ THROUGH THIS ENTIRE MANUAL BEFORE USING

YOUR NANOJECT II. PAY CLOSE ATTENTION TO THE RULES FOR SAFE

OPERATION WARNINGS AND CAUTIONS.

Input: 100-240~V, 50-60 Hz, 0.6A

Output: 12V 2A