DrunkLizard X7 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DrunkLizard X7. DrunkLizard X7 10 pages.

Imprimer la page

5 Specifications

Item

Product

Scooter Specification

Unfolded size

Folded size

Height from pedal to ground

Net weight

Basic Information

Capacity

Mator power

Mileage per charge

Swappable battery

Max speed

Max loading

Max hook load

Max climbing angle

Charger Specification Model

Input voltage

Frequency

Output voltage / Output current

Store temperature

Note: Mileage, maxes and speeds are attainable in ideal riding conditions; battery mileage depends on rider's weight, scooter speed,

- 1 5 -

outdoor temperature and stop/go traffic. Above stats attained cruising in energy-saving mode at 77°F temp with a 165 lbs load.

air-filled tube tire

air-filled tubeless tire

8.5 inch

10inch

frame made of aviation aluminum alloy

IP54 water resistant level

W front-wheel motor

350W front-wheel motor

9-12 miles

yes

100-240Vac

50-60Hz

42V / 2A

50°F-95°F/10°C-35°C

6 Maintenance

Maintenance considerations:

• Make sure the electric scooter charger and charging line are disconnected, and ensure that the electric scooter is off, when not in use.

• Wipe the exterior with a soft cloth to clean the electric scooter.

• Maintain tire pressure in accordance with the PSI listed on your tire's sidewalls. The DrunkLizard 8.5" is an air-filled tubeless tire;

keep 8.5" tire pressure at 50 PSI. The DrunkLizard 10" is an air-filled tube tire; keep the 10" tire pressure at 28 PSI.

&Warning

• Do not clean the scooter by using high-pressure water hoses, or by soaking in water, to prevent damage to the electronics

• BE SURE TO MAINTAIN YOUR SCOOTER AND ITS COMPONENTS TO ENSURE THEY ARE IN PROPER WORKING ORDER

BEFORE RIDING, INCLUDING TIRE PRESSURE, BRAKES AND LIGHTS.

• Be sure to properly care for and protect custom pinstriping art (should this be applicable for your scooter) to ensure it lasts.

Storage

• Please charge your electric scooter before storage to prevent the battery cells from discharging during dormancy.

(Please be sure to charge at least once every three months while in long-term storage.)

• If the storage environment temperature is lower than 32 0F, don't charge the electric scooter. Please put it in

inside where the temperature is above 50 0F, and then charge. Storage temperature should be between 50 °F

to 95 °F.

• Please keep the electric scooter in a suitable place: indoor, dry, within appropriate temperatures and away from

damaging hazards.

• Cover to prevent dust buildup and rust.

&Warning

• Scooter loads with weight in excess of 220 lbs may cause damage to the drive ability, motor wear, battery life and speeds.

• In order to protect the user's safety, the user should not take apart the electric scooter. Tampering, disassembling, mis-use or

abuse of the scooter automatically voids the scooter's written and/or expressed warranty.

-1 6-