Dry & Store DryMax Mode d'emploi

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Dry & Store DryMax. Dry & Store DryMax 2 pages.
Également pour Dry & Store DryMax : Manuel de démarrage rapide (2 pages)

Imprimer la page

IMPORTANT SAFEGUARDS

This product is for household use. When using electrical

products, especially when children are present, basic safety

precautions should always be followed, including:

DANGER – To reduce the risk of electrocution:

• Do not use while bathing.

• Do not place or store product where it can fall or be

pulled into a tub or sink.

• Do not place in or drop into water or other liquid.

• Do not reach for this device if it has fallen into water.

Unplug immediately.

WARNING – To reduce the risk of burns, electrocution, ﬁ re,

or injury to persons:

• Closely supervise use of the product by, on or near

children or disabled individuals.

• Use this product only for its intended use as described

in this manual.

• Never operate this product if it has a damaged cord or

plug, if it is not working properly, if it has been dropped

or damaged, or dropped into water. Return it to the

place of purchase or service center for examination

and repair.

• Never place the product on a soft surface such as a bed.

Keep any air openings free of lint, hair, and the like.

• Do not use outdoors or operate where aerosol (spray)

products are being used or where oxygen is being

administered.

• The AC adapter included with your unit is made

speciﬁ cally for this product. Do not use it with another

appliance, and do not use an adapter from any other

electrical device in its place.

• DryMax-UV only: The lamp illuminates only when the

lid is closed in order to prevent exposure to the UV-C

light. Do not modify any components to override this

safety feature. Do not look directly at the UV-C lamp

while illuminated. If the lamp shatters, unplug the

appliance immediately. Do not use until the appliance

has been repaired by an authorized service center.

Wear gloves when contacting any glass particles.

Dispose of properly.

NOTE: This product is not designed to diagnose,

prevent, monitor, treat, or alleviate disease.

OPERATING CONDITIONS

The operating temperature of this appliance is a range

of 95° to 104° F (35°- 40° C). This appliance will function

properly at indoor ambient temperatures from 65° - 86° F

(18°- 30° C).

Some models do not contain a germicidal lamp. If this applies to your appliance, disregard any instruction or comment that refers to "germicidal", "blue light" ,

"ultraviolet" , "UV", "UV-C" , or "lamp".

Operating Instructions

READ ALL INSTRUCTIONS BEFORE USING

SAVE THESE INSTRUCTIONS

Introduction

This product has been designed for all types of hearing

instruments, including hearing aids, noise maskers, ear

monitors, ear buds, ampliﬁ ers, and implant equipment.

Used daily, it can help most hearing instruments

sound better, last longer, and perform more reliably.

Technology exclusive to Dry & Store removes damaging

moisture, dries earwax, captures odours, and in high-

humidity conditions, can also extend zinc air battery life.

Additionally, the DryMax-UV model improves comfort by

killing the bacteria that are the most common cause of skin

irritation among hearing device users.

Before Your First Use

1. Activate the desiccant: A disposable "Dry-Brik

which should be replaced every month, is included. The

Dry-Brik performs three important functions: (1) to

permanently remove the moisture molecules that are

released from the devices during the drying cycle, (2) to

drive the relative humidity inside the box to a much lower

level than is possible with just a heater, thus maximizing

the drying capability, and (3) to capture odours.

To activate the Dry-Brik Mini,

remove the foil cover. Do not remove

the foil until you are ready to use the

Dry-Brik, because once it is removed

the Dry-Brik will begin adsorbing

moisture.

2. Record the activation date: To alert

you when it is time for replacement,

a card is attached to each Dry-Brik.

Write the date that the Dry-Brik was

placed in service on this card.

NOTE: To ensure maximum

performance, change the

Dry-Brik Mini every month.

3. Place the activated Dry-Brik Mini

in your unit, as shown in Figure 3.

4. Connect the AC adapter: The

micro-USB plug fits into the rear

of the unit. Do not force; it should

slide in easily. Finally, plug the AC adapter into an active

electrical outlet.

(Important)

DM / DM-UV INSTR (ENG) 0718 Rev B

Mini",