DRY AGER DX 500 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DRY AGER DX 500. DRY AGER DX 500 17 pages.
Également pour DRY AGER DX 500 : Manuel de l'utilisateur (14 pages), Instructions de remplacement (2 pages)

Imprimer la page

Dimensions DX 500

Required ventilation shafts are absolutly necessary.

Minimum size: 200 cm

Overall dimension with opend door: 615 mm.

Overall dimension body + door (protruding): 610 mm.

Covering of distance possible by DRY AGER moulding

Available as an accessory in our shop: www.dry-ager.com/shop.

. Possible on the side or at the back.

Electrical connection

Only operate the appliance with alternating current (AC). The

permissible voltage and frequency are indicated on the type

plate. The position of the type plate is shown in the

section entitled Description of the appliance. The socket

must be properly earthed and protected by a fuse.

The tripping current of the fuse must be between 10 A and 16 A.

The socket must not be situated behind the

appliance and must be easily accessible.

Do not connect the appliance using an extension cable or

extension socket.

Do not use stand-alone inverters (conversi-

on of direct current to alternating current/

thre ephase cur re nt) or e ne rgy-saving

plugs. Risk of damage to the electronic

control system!

Interior Light

The interior of the appliance is lit by an LED light strip at the top

of the interior container.

The light intensity of the LED light corresponds to laser

class 1/1M.

Important

If the cover is removed, do not look directly at the

light through optical lenses from close distance. This can-

damage your eyes.

Safety lock

The lock in the appliance door is equipped

with a safety mechanism.

Locking the appliance:

• Insert the key as shown by arrow 1.

• Turn the key 90°.

To unlock the appliance, the

same procedure must be repeated.