Absolare Passion Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Absolare Passion. Absolare Passion 10 pages.

1. General Description

The Absolare Preamplifier is a single chassis line stage preamplifier with an all tube

signal path and point-to-point construction. Inside the chassis, mains transformers

and DC regulators are isolated from the signal section by an internal partition, to

further reduce noise and hum. Balanced (XLR) and Single-Ended (RCA) versions

are available. The balanced version has 4 input channels and unbalanced version

has 3 input channels.

2. Safety Issues and Warnings

- Ensure the voltage setting of the unit matches the voltage of the available AC

power. Operating voltage is fixed and must only be changed by an authorized

service agent.

- Do not touch tubes while operating. Tubes are extremely hot devices and also

contain very high voltages.

- There are no user serviceable parts inside the chassis. Do not open bottom covers.

3. Unpacking and Placement

After opening the top cover of the box, remove the upper layer of hard foam material.

You can then lift the unit from the box using the cloth underneath the chassis.

Feet can affect the sound quality significantly. Feet should be placed directly under

the aluminum base plate, not the MDF/leather plate. There are three areas where

the aluminum base plate is exposed through openings in the bottom MDF/leather

plate. These areas are where feet should be placed. You can use either three or four

feet. Adjusting their position will also affect the sound to varying degrees, depending

on the type of rack, location or interaction with other equipment. For most situations

the arrangement as shown in the diagram below is a good starting point.

ABSOLARE Preamplifier User Manual 0.9