Absolare Signature Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Absolare Signature. Absolare Signature 10 pages.

5.  Connecting  the  Cables  
5.1.  Power  cable  
AC power input is via a standard IEC socket. Operating voltage must only be
changed by an authorized service agent.
The quality of the power cable used will affect the sound quality.
5.2.  Signal  Cables  
You can connect 3 unbalanced or 4 balanced source devices at the same time. The
selector knob on the left hand side switches between the input channels. Output is
single-ended RCA or transformer balanced XLR depending on the version.
6.  Operating  the  Unit  
Absolare Preamplifier will be ready to operate seconds after turning on the power,
but attaining full performance may take 15 to 30 minutes.
Signal ground and chassis/power ground is separate inside the Signal Stage and
they are connected by a high pass filter to reduce hum and noise. The outside parts
of the RCA connectors are connected to signal ground. Balanced (XLR) version has
transformer balanced input and output on pins 2 and 3; pin 1 is connected to chassis
ground.
There are no adjustments for the preamp.
With the motorized remote control option you can change the volume setting with the
IR remote control. Operating angle is approximately 45°.
7
ABSOLARE Preamplifier User Manual 0.9