Anodyne Therapy Freedom 300 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Anodyne Therapy Freedom 300. Anodyne Therapy Freedom 300 20 pages.
Également pour Anodyne Therapy Freedom 300 : Informations sur la sécurité et instructions relatives à la demande (20 pages)

SUMMARY

Set Up: Plug Power Supply into an electrical outlet and depress

the On/Off Switch on the Control Unit to the On position. If the

Green Indicator Light turns on the device is operational. Turn

the On/Off Switch to the Off position.

Put the Calf Treatment Pad over the back of your calf:

Place the Calf Treatment pad over the back of your calf with the

diode clusters resting on the back of your calf. Hold the short

side of the top attachment strap against your shin. Wrap the

longer side of the top attachment strap around your leg and over

the short side of the attachment strap and press the Velcro end

to hold in place. Follow the same procedure with the bottom

attachment strap. The attachment straps should only be tight

enough to hold the treatment pad-do not overtighten.

Put the Foot Treatment Pad on the bottom of your foot: Loosen

the attachment strap of the Sandal so you can slide your foot

easily into the Sandal. Slide your bare forefoot (do not wear socks

or stockings) into the sandal, tighten to hold in place on your

foot. The back of your heel should be positioned at the rounded

side of the Foot Treatment Pad.

Warning: Do not over tighten Attachment Straps or stand on

Foot Treatment Pad as this may increase risk of burns.

Turn on Control unit to begin treatment: Depress the On/Off

switch on the Control Unit to begin treatment (note: the green

indicator light will turn green for 30 minutes. The unit will

automatically turn off after 30 minutes of operation. Remove at

the end of the 30 minutes (when the unit turns off ).

Warning: Immediately remove Treatment Pads if they feel too

warm for comfort as you may be at an increased risk for burn.

Remove Treatment Pads at the end of treatment: Disengage

the calf attachment straps and remove the Calf treatment pad.

Slip the foot sandal of your foot. Turn off Control Unit, unplug

from electrical outlet, and store in a safe place away from children

and pets.

Basic Operating Instruction