Anolis ArcLine DVP 600 Integral Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Anolis ArcLine DVP 600 Integral. Anolis ArcLine DVP 600 Integral 14 pages.

Imprimer la page

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure

safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this

manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual

or any unauthorized modification to the device.

Unauthorized modification will void warranty.

1. Safety instructions

DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!

This fixture should be operated only from the type of power source indicated on the marking label. If you are not

sure of the type of power supplied, consult your authorized distributor or local power company.

Always disconnect the fixture from AC power before cleaning, servicing or installing.

Do not overload wall outlets and extension cords as this can result in fire or electric shock.

Make sure the power cord is never crimped or damaged by sharp edges. Check the fixture and the power cord

from time to time.

Do not install the unit near an open flame.

During operation the housing becomes hot.

Refer servicing to qualified service personnel.

This fixture falls under protection class I. Therefore this fixture has to be connected to a mains socket outlet with

a protective earthing connection.

Do not connect this fixture to a dimmer pack.

LED light emission. Risk of eye injury. Do not look into the beam from a short distance without suitable protective

eyewear. Do not look at LEDs with magnifiers or similar optical instruments that may concentrate the light

output.

Keep combustible materials at least 20 cm away from the fixture.

If the fixture has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on

immediately. The arising condensation of water might damage your device. Leave the device switched off until it

has reached room temperature.

Avoid brute force when installing or operating the fixture.

ArcLine DVP Integral

BEFORE POWERING OR INSTALLING YOUR ArcLine DVP Integral !

Save it for future reference.