Anolis ArcLine DVP 900 Integral Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Anolis ArcLine DVP 900 Integral. Anolis ArcLine DVP 900 Integral 14 pages.

Imprimer la page

ArcLine DVP Integral

3. Installation

3.1 Mounting the fixture

The ArcLine DVP Integral can be arranged in any orientation on a flat, non-flammable surface by means of the wall

mount adaptor .

1. Screw both mounting brackets (2) on a flat surface by means of suitable flat-head screws (3). The hole in the

mounting bracket (2) has a diameter of 6.2mm.

2. Place the ArcLine DVP Integral (1) into the mounting brackets (2) and secure the unit by means of the two

holders (4) with two screws M5x12 (5) each.

Ensure that the structure to which you are attaching

the unit is secure.

3.2 Connecting to mains

The unit must be installed by a qualified electrician in accordance with all national

and local electrical and construction codes and regulations.

This device falls under class one and must be grounded!

The ArcLine DVP Integral is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz

AC power source from 100-277 Volts.

A 5-cored cable Flamar Li9YC11Y with 12-pin conector Chogori serves for data/power input. Three cores serve for

the power supply and next 2 shielded cores are intended for DMX connection as shown in the table.

Core

Connection

Core

Connection

Black

Live

Red

Data +

Blue

Neutral

White

Data -

Yellow/Green

Shielding

The ArcLine DVP module should be connected to the Data Configurator unit which allows power supply of the

ArcLine DVP modules and their addressing and setting. Please see the user manual of the Data Configurator.