Anolis arcpower smartwhite 72 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Anolis arcpower smartwhite 72. Anolis arcpower smartwhite 72 20 pages.

Imprimer la page

installed following the manufacturer´s instructions.The earth has to be connected!

Cord plug connections:

Cable

Brown

Light blue

Yellow/Green

This device falls under protection class I.Therefore the ArcPower SmartWhite 72 has

to be connected to a mains socket outlet with a protective earthing connection.

4.2.Mounting the ArcPower SmartWhite 72

The ArcPower SmartWhite 72 should be be placed on a non-f lammable f lat surface in any orientation and

fixed by the two screws.There are two mounting holes of diameter 5 mm in housing of the driver. Ensure that

instalation place is enough ventilated.

4.3.Conection cables

1.The adapter cable RJ45/XLR connects the ArcPower SmartWhite 72 to the DMX controller.If your DMX control-

ler has RJ45 socket for DMX output,use RJ45 patch cable for connection with the ArcPower SmartWhite 72.

RJ45 plug

View facing pins

Pin 1: Not used

Pin 2: Not used

Pin 3: Not used

Pin 4: Not used

Pin 5: Not used

Pin 6: Data +

Pin 7: Data -

Pin 8: GND

International

Live

Neutral

Earth

Screw

Flat surface

Mounting hole

DMX 512 XLR plug (male)

Front view of the plug

Screw

Pin 1: GND

Pin 2: Data -

Pin 3: Data +

Pin 4: Not used

Pin 5: Not used