Anolis ArcControl SU Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Anolis ArcControl SU. Anolis ArcControl SU 6 pages.

Imprimer la page
ArcControl SU
3. Mount the interface on the wall
First, mount the backside of the interface on the wall with 2 or more screws. Secondly, connect the DMX and
power (connector block or RJ45).
The front panel is mounted by pressing it against the back plate and then sliding down. Two screws should then be
attached underneath to hold the controller in place.
MAKE SURE THE CONTROLLER IS MOUNTED FLAT WITHOUT OBSTRUCTIONS FROM BEHIND AS THIS CAN PUSH
APART THE GLASS

3. Other Connections

4. Connections and Hardware Operation

Center Button
There are several operation modes for the button in the center of the palette. These can be set within the
Hardware Manager.
4