Dryflow 2470IFS Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dryflow 2470IFS. Dryflow 2470IFS 6 pages. Recessed hand dryer panel
Imprimer la page
1
Wiring instructions
Always ensure that the installation
conforms to the current edition of
the I.E.E. wiring regulations, BS 7671
(UK) or the appropriate standards in
your country. Ensure that the unit is
separately fused with a suitably rated
fuse and that it is connected to the
supply with a double pole isolating
switch having a contact separation of
at least 3mm. Care should be taken
that single insulated conductors
cannot come into contact with the
mounting surface.
P.02
4
Intelligent Facility Solutions
WARNING
The hand dryer MUST be isolated from the power
supply during installation or maintenance.
318
Mounting instructions
The aperture required in the wall
to mount the 2470 unit is 458mm
(H) x 318mm (W) x 105mm (D), see
Illustration 1. The distance from finished
floor level to the bottom of the aperture
should be as follows:-
• Male washrooms
• Female washrooms
• Disabled washrooms
• Children aged 14-17
• Children aged 11-13
• Children aged 8-10
• Children aged 4-7
1028mm
978mm
876mm
978mm
876mm
774mm
672mm