DryGuy Circulator DG10 Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DryGuy Circulator DG10. DryGuy Circulator DG10 4 pages. Boot & shoe dryer
Également pour DryGuy Circulator DG10 : Manuel d'instruction (2 pages)
OPERATING INSTRUCTIONS:
1. Plug the DryGuy
slide into footwear being cautious not to restrict or block air circulation.
2. Do NOT trap, smother, pinch, or suffocate the air circulation into or out of footwear with clothing or any
other substance. This may cause overheating.
3. Do NOT force the DryGuy
opening at the entrance to footwear as attainable being careful not to restrict or block air flow by any
means.
4. Leave one inch of free space between DryGuy
helPfUl TIPs:
1. Make sure not to pinch or otherwise suffocate air circulation when placing unit into boots or shoes.
Loosen laces and pull footwear tongue outward to help open breathing space whenever possible.
2. Boots or shoes should be dried after every use to help prevent bacteria and fungus growth which is the
primary cause of footwear odor.
3. Smaller boots, shoes and garments will dry quicker than larger items.
4. Your energy efficient DryGuy
technology quietly dries wet garments, but it does not generate a forced air movement. At first you may
suspect the unit is not operating properly. We recommend placing the unit into your shoe or boot for a
period of 15 to 20 minutes as the heat will be felt when unit is placed in footwear and in service.
5. NOT FOR USE IN GLOVES, SOCKS OR GARMENTS OTHER THAN BOOTS AND SHOES.
OPeRATION TIMe:
• Drying time varies depending upon extent of moisture as well as temperature and humidity.
• We recommend a minimum of one hour every time your boots are used.
MAINTeNANce:
Use only a damp cloth to clean the DryGuy
Circulator
into any standard 120 Volt 60 Hz electrical household outlets. Carefully
™
™
Circulator
™
Circulator
™
dryguy.com
into smaller footwear. The unit will work by leaving as much
™
Circulator
™
™
heats to a gentle temperature and using Thermal Convection
™
Circulator
. Never immerse any part into liquid.
™
™
and the toe end of the shoe or boot.