Anova Tuscany T2247T Instructions de montage - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Anova Tuscany T2247T. Anova Tuscany T2247T 2 pages. 36" bar height tables
Imprimer la page
4. Locate one of the table legs. Position the leg so
that the tab holes align with the table support holes
inside on both ends. Place a 1/4" flat washer on a
1/4"-20 x 1/2" thread cutting pan head Phillips screw.
Insert a screw with washer into each tab and tighten
using a #3 screwdriver.
5. Install the second leg in the same manner.
6. Adjust the leveling feet on the legs as needed.
NOTE: Please contact Customer Care at 1-866-797-1761 for assistance in placing a replacement part order.
7/31/2019
¼"-20 x ½" Thread Cutting Pan
Head Phillips Screw
Copyright 2019 ANOVA®
Legs
Legs
¼" Flat Washer
Manufactured in the U.S.
¼" Flat Washer
¼-20 x ½" Thread
Cutting Pan Head
Phillips Screw
2