Dryton MiTime T720M Manuel du propriétaire - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dryton MiTime T720M. Dryton MiTime T720M 2 pages. Mitime programmer series rf packs

Imprimer la page

Step 4: Prog. Timetable

Step 5: Period Settings

→

Zone = Heating

Day range & period

Highlight shows adjustable field:

Link to Copy days

Use up/down buttons to adjust values

Timetable day range: Monday to

Period settings: On at 6:30am and Off

Friday (Week and weekend)

at 8:30am

Options: Individual days (7day), Week and

weekend (5/2day), All week (24hr). The

Help text: Use left/right buttons to

available blocks depend on the selection

change fields

in menu "change timetable type"

Help text: Use left/right buttons to

Stored programmes

select the days you want to change

MiTime contains 3 pre-set programmes. An

example is shown below. These programmes can

Arrow denotes that further options are

be modified according to personal needs and

available if you scroll down.

can be stored by using a name. Via this name they

also can be reloaded. Once a programme has

been modified, the original factory pre-set will no

Period 1 settings: describes the current timetable

longer be available. On a System Reset, only the

settings, e.g. Heating has been programmed to

current loaded programme will be replaced with

turn On at 6:30am and go off at 8:30am

the factory setting – see Installation Guide Step 4.

Period 2 settings: describes the current timetable

Programme 1

settings, e.g. Heating has been programmed to

Example:

turn On at 4:30pm and go off at 10:30pm

1st On

Press select ( ) when highlighted to adjust

1st Off

settings (see Step 5)

2nd On

Up to 4 periods can be programmed

2nd Off

Step 7: Keys and Display - MiStat

RF Pack: MiStat N110R, MiStat C110C

RF transmission indication.

Current room temperature

The RF symbol will be

visible as follows,

Short flashes indicates an

RF transmission.

Current Setting,

see table below

Long flashes indicates an RF

transmission issue.

key: Press to

toggle between

Comfort setting, Eco

setting and Home

(Room thermostat

only). See table below.

key: Press to

cancel +hr and display

home. (Cylinder

thermostat only)

Select key: Press

to open and save

editor screens

Symbol in

Function

Description

display

Selects the comfort setting. The pre-set value is used

Comfort setting

each time when activated, adjustable within the menu

Selects the Eco setting. The pre-set value is used each

Eco setting

time when activated, adjustable within the menu.

Indicates that the pre-set temperatures were changed

None

Home screen

via +/- key

6444 Invensys MiSeries RF Channel USER 06490193001 IssF.indd 2

Step 6: Additional User Settings

→

Feature:

Description:

Programme

On & Off times for the current period can be

Timetable

modified. See description in 'Step 4'

Copy days

Will copy the current day to one or more other days

Add Period

Adds a Time event. It will be added at the correct

position within the day. There is a maximum of 4

periods.

Remove Period

Removes the selected period. There needs to be at

least 1 period

Change

The visible day-blocks available in "programme

Timetable Type

timetable" can be defined, see Step 4

Individual days

Each day can be programmed individually

Week and

Mon... Fri and Sat... Sun can be programmed as 2

weekend

blocks

All week

Mon...Sun can be programmed as one block

Stored

MiTime contains 3 pre-set programmes. These

programmes

programmes can be modified according to personal

needs and can be stored by using a name. Via this

name they can also be re-loaded. Once a programme

has been modified, the original factory pre-set will no

longer be available unless a System Reset is applied -

see Installation Guide Step 4.

All week

Week & Weekend

Load stored

A pre-set programme can be loaded

programme

Mon-Sun Mon-Fri

Sat-Sun

Save current

The current programme can be saved by name (Each

6:30am

7:00am

programme

pre-set program includes: Individual days, week/

8:30am

9:00am

weekend, all day and custom day schedules)

4:30pm

4:00pm

10:30pm

10:30pm 11:00pm

Step 8: +hr (Boost)

→

Call for heat indication.

This flame will be visible

when the room

temperature is below

the set temperature.

Current set temperature

Press +hr to Boost

+hr key: Press to add up

to 3 hours to the current

period or to get instant

1 to 3 hours if currently

off (see step 8).

+ & - keys:

Press to change

the current

temperature or

turn the heat on

MiStat

if currently off

Press +/- to adjust +hr period between 0 and 3 hours

Press ( ) to confirm

Now the Boost is running. The time will be counted

Note: Settings

down each hour.

changes can be

made via the

Once the time has elapsed, control returns to the

MiTime unit

prior temperature screen.

The Boost can be cancelled by pressing the (

or by setting the +hr period to 0.

→

Feature:

Factory Pre-Set:

Help Tips

Holiday switch

off

Status

Zones

Holiday start

time (From)

Holiday start

Default

date (From)

Holiday end time

(To)

Programme 1

Holiday end date

(To)

Time and date settings

Set time

Set date

Daylight saving

Clock format

Step 9: Changing the Batteries

→

How do I know when to change

the batteries?

When the batteries start to run low a battery icon will

flash in the display to indicate "low battery", during

this time the MiStat will function normally. When the

battery icon alone is alone is shown in the display, the

batteries are completely exhausted and the MiStat will

cease to function (see below). Re-activate by replacing

the batteries.

MiStat

) key

Press Select to enter a specific

Setting. Options shown below:

Description:

Factory Pre-Set:

Describes the button functions

In the period until holiday starts the product will operate normally.If holiday

is disabled manually or terminates automatically, the mode before start

of holiday will be re-instated.An enabled holiday will be indicated with a

suitcase symbol in the top line. If holiday is active, in the Set: line the holiday

end date will be indicated. In the Summary screen the suitcase will be visible

together with the holiday temperature.

Enable or disable holiday mode.

Disabled

Holiday mode can be applied to a specific zone or

All zones

all zones

Set the time for the start of your holiday

Current time -

nearest hour

Set the date for the start of your holiday

Today

Set the time for the end of your holiday

Current time -

nearest hour

Set the date for the end of your holiday

Today + 1 week

To set time of day

Factory set

To set date

Factory set

To enable or disable daylight saving

Enabled

To select 12h or 24h clock mode

12hr

How to replace the batteries

Remove the battery covers as shown. Replace the batteries with 2 x 1.5V IEC LR6 (AA) Alkaline batteries ensuring

correct orientation. Replace the battery covers pressing fully home.

Mi Sta t

Troubleshooting:

✎

Setting temperature values is restricted

Are Minimum/Maximum temperatures activated?

see Installation Guide Step 8.

NO SIGNAL is visible on the screen, no reaction on

key presses anymore

Is the receiver powered? (Red signal lamp should

be visible)

Is the room thermostat powered? see Homeowner

Guide Step 9.

LOCKED is displayed on the room themostat

see Installation Guide Step 8 - Screen Lock

Is the battery symbol visible?

Replace batteries, see Homeowner Guide Step 9.

STARTING is visible on the thermostat screen, no

reaction on key presses anymore

Is the receiver powered? (Red signal lamp should

be visible)

WAIT is visible on the thermostat screen, no reaction

on key presses anymore

Is the receiver powered? (Red signal lamp should

be visible)

MiStat Rear

Battery Covers:

Slide outwards

to remove

Battery Handling

Batteries, rechargeable or not, should not be disposed

of into ordinary household waste. Instead, they must be

recycled properly to protect the environment and cut down

the waste of precious resources.

Your local waste management authority can supply details

concerning the proper disposal of batteries.

In compliance with the EU Directive 2006/66/EC, the button

cell battery located on the printed circuit board inside the

product, can be removed at the end of the product life, by

professional personnel only.

27/09/2013 09:19