DS Produkte LED6 Manuel d'instructions - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} DS Produkte LED6. DS Produkte LED6 9 pages. Led lights

DS Produkte LED6 Manuel d'instructions
EN
Dear customer,
We are delighted that you have decided on these LED lights. If
you have any questions, please contact customer service via our
website:
www.service-shopping.de

Explanation of symbols

Hazard symbols: This symbol indicates risks of injury.
Carefully read through the corresponding safety notes and
comply with them.
Switching symbol for direct current
Supplementary information
Safety class III
Read the instruction manual before use!

Explanation of signal words

WARNING
Warns of possible severe injuries and risk to life
CAUTION
Warns of minor to moderately severe injuries
NOTICE
Warns of damage to property
Proper use
The products serve as a light source and are suitable for use
as an indoor decoration.
The products are not suitable for outdoor use.
The products are intended for private and not for commercial
use.
Only use the products as described in the instructions. Any
other use is deemed improper.
Defects arising due to improper handling, damage or attempts
at repair are excluded from the warranty. This also applies to
normal wear and tear.
Safety notes
WARNING – Risk of suffocation! Children and animals must
be kept away from the packaging material.
The products are not a toy! Do not leave children and animals
unattended with the products!
WARNING – Risk of chemical burn by battery acid!
Batteries may be life threatening if swallowed. Therefore, store
the batteries and product out of reach of children and animals.
If a battery has been swallowed, you must seek immediate
medical attention.
CAUTION – Risk of chemical burn by battery acid! If a
battery has leaked, do not let battery acid come into contact
with skin, eyes and mucous membranes. If applicable, wear
protective gloves. In the event of contact with the battery acid,
rinse the affected areas immediately with plenty of clean water
and consult a physician as soon as possible.
NOTICE – Risk of material damage and damage to
property
Before inserting the batteries, check whether the contacts on
the products and on the batteries are clean, and clean them if
necessary.
Only use the battery type specifi ed in the technical data.
Always replace all batteries. Do not use different battery types,
brands or batteries of different capacitances. When replacing
the batteries, make sure that the polarity (+ / –) is correct.
Product number: 04297
Remove the batteries if they are empty or if you are not using
the products for an extended period. This way, you can avoid
damage caused by leaking.
Immediately remove a leaking battery and clean the contacts
before inserting new batteries.
Batteries must not be recharged or reactivated by any other
means, taken apart, thrown on a fi re, immersed in liquids or
short-circuited.
Install the products in a secure area on a dry base at a suffi cient
distance to heat sources such as e.g. ovens and heaters.
Never submerge the products in water or other liquids!
Never touch the products with wet or damp hands.
Protect the products against heat, open fl ames, direct sunlight,
minus temperatures, prolonged exposure to moisture, wetness
and percussions.
The products must not be used if they exhibit visible damages.
The individual LEDs cannot be replaced.
Do not in any case use any strong or corrosive cleaners or
rough sponges. They could damage the surfaces.

Product contents

5 x LED light
1 x remote control
1 x 3 V type CR2025 button cell (already inserted)
1 x instructions
Unpack all parts and make sure that the product contents are
complete and check for transport damages. Do not (!) use the
parts if they are damaged, instead contact our customer service.

Product overview

3
Remote control
e
d
Not shown:
1 x remote control with 1 x 3 V button cell (CR2025) already
inserted (the protective strip must be removed)
1 x instructions
Instructions
1 On / Off button
2 LED lights
3 on the bottom: battery
compartment and battery
1
compartment cover with
2
adhesive pad
a
(Brightness 50 % / 100 %)
b Multi-colour (colour change)
a
c Colour selection (12 colours)
d Timer buttons 4H, 8H (fi rst
b
select the desired function and
then push the timer button):
daily luminous period in hours.
E. g.: If 4 is selected, the lights
c
will switch off after 4 hours
and back on after 20 hours.
e ON / OFF Switch the lights on /
off