DS Produkte SAV-09 Manuel d'instructions - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} DS Produkte SAV-09. DS Produkte SAV-09 8 pages.

Instructions
GB
Dear customer,
We are delighted that you have decided to purchase our hair re-
moval set. With this article, you can painlessly remove bothersome
body hair. The gentle vibration stimulates your hair follicles while
giving your skin a peeling at the same time. The result is more beauti-
ful, smoother skin.
If you have any questions, contact the customer service department
via our website:
www.service-shopping.de
Before using the device for the fi rst time, please read
the instructions through carefully and store them in
a safe place. If the device is given to someone else, it
should always be accompanied by these instructions.
The manufacturer and importer will not accept liabil-
ity if the directions in these instructions are not observed!
We reserve the right to modify the article, packaging or en-
closed documentation at any time in conjunction with our
policy of continuous development.
Proper Use
❐ The article is designed for hair removal on body and face.
❐ Not suitable for removing male beard hair or the hair of the
head.
❐ Not suitable for children.
❐ This article is for personal use only and is not intended for com-
mercial applications.
❐ The article must only be used as described in the operating in-
structions. Any other use is deemed to be improper.
Safety Notes
❐ Do not leave children or pets unsupervised with the device.
❐ Before fi rst use, test the article on a small skin area. If you ex-
perience any skin irritation, do not use the article further and
consult a physician.
❐ Not suitable for persons with diabetes.
❐ Do not use on irritated, burned skin or around open wounds.
❐ Only use on clean, dry skin. Do not used on skin treated with a
lotion or cosmetics.
❐ The vibration adapter may not be immersed in water nor may it
come into contact with water.
❐ Slightly redded skin after hair removal is normal. However, con-
sult a physician, if you experience severe, prolonged skin irrita-
tion.
❐ Swallowing batteries poses a risk of death. Therefore, keep bat-
teries and the article out of the reach of young children. Should a
battery be swallowed seek medical help immediately.
❐ Before inserting the batteries check that the contacts in the ar-
ticle and on the batteries are clean and, if necessary, clean them.
❐ Use only the batteries specifi ed in the technical data.
❐ Always replace all batteries at the same time. Do not mix differ-
ent types or brands of battery or batteries of varying capacities.
When changing batteries ensure correct polarity (+/-).
❐ Remove the batteries from the article if they are used up or if
you are not using the unit for an extended period. This will pre-
vent damage which can be caused by leakage.
❐ If a battery has leaked, avoid contact of the battery acid with
skin, eyes and mucus membranes. In case of contact with battery
05978_DE-GB-FR-NL_A4_V2.indd 3
05978_DE-GB-FR-NL_A4_V2.indd 3
acid, rinse the affected area immediately with plenty of clear
water and seek a doctor at once.
❐ Take any leaking batteries out of the unit immediately. Clean the
contacts before inserting new batteries.
❐ The batteries should not be recharged or reactivated by any
other means, taken apart, thrown on a fi re, immersed in liquid
or short-circuited.
Warranty provisions
The following are excluded from the warranty: all defects caused by
improper handling, damage or unauthorised attempts to repair. The
same applies for normal wear.
Scope of supply
1 large applicator with a vibration function
1 small applicator
5 large hair removal pads
5 small hair removal pads
1 storage bag (not shown)
1x 1.5 V button cell, type AG 12
Article Overview
Applicator
(large)
Applicator
(small)
Inserting/Changing Batteries
1. Take the vibration adapter out of its bracket
on the large applicator.
2. Push the battery compartment open in the
direction of the arrow and insert a 1.5 V but-
ton cell, type AG 12.
3. Close the battery compartment and put the
vibration adapter back in its bracket on the
large applicator. Ensure that the vibration
unit has been fi rmly and securely positioned.
Preparation
ATTENTION!
❐ Before you affi x a hair removal pad on the applicator, check that
the surface of the applicator is clean and dry. Clean the applica-
tor as describes in the section „Cleaning".
1. First remove any cream or cosmetic residue from your skin.
2. Remove the protective foil from the back of
the hair removal pad.
3. Adhere the pad to an applicator of corre-
sponding size.
4. Replace the pad if you fi nd that the effectiveness of the pad is
decreasing. First, remove the old pad and clean the applicator
as described in the "Cleaning" section if necessary, before you
adhere a new pad.
Hair removal pads
(large)
Hair removal pads
(small)
Vibrating pod
Z 05978_V2
19.12.12 10:46
19.12.12 10:46