Fox-Lux FXSD Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Fox-Lux FXSD. Fox-Lux FXSD 2 pages. Led emergency surface downlight

Imprimer la page
FXSD LED Emergency Surface Downlight
Product Variants and Part Numbers
Part no.
FXSD02-1.5/O/3
Ceiling mounted LED downlight NM 1.5W 150lm open area lens
FXSD02S-1.5/O/3
Ceiling mounted LED downlight NM 1.5W 150lm open area lens SELF-TEST
FXSD02-1.5/C/3
Ceiling mounted LED downlight NM 1.5W 140lm corridor lens
FXSD02S-1.5/C/3
Ceiling mounted LED downlight NM 1.5W 140lm corridor SELF-TEST
FXSD02-3/O/3
Ceiling mounted LED downlight NM 3W 270lm open area lens
FXSD02S-3/O/3
Ceiling mounted LED downlight NM 3W 270lm open area lens SELF-TEST
*Remote Control REM10 allows the competent user to carry out functional tests and/or full duration tests at any time and to check system status. Please refer to REM10 user guide.
Installation
1: Isolate mains
Ensure that the mains supply is switched off
before installing, maintaining or servicing the
emergency luminaire.
4: Cable size and strip length
Blue
N
Brown
L
(Permanent)
2
0.75 -1.5mm
7: Re-attach front cover
Description
2: Remove front cover
5: Connect mains
8+1mm
•
This product is classified as Class II.
Earth connection not required
•
Secure mains cable by using cable clip and screws supplied
8: Restore mains supply
t | +44(0)1543 396400 | e | [email protected] | w | www.fox-lux.co.uk
Registered Office: Alex House 260/8 Chapel Street, Salford, Manchester, M3 5JZ
Company Registration No. 11821284 VAT Registration No. 320 9921 12
Testing
Remote control
Manual
Self-test
Manual
Self-test
Manual
Self-test
3: Install base
Use screwdriver to
press the small hole on
the side, then lift up the
mounting base.
Drill where indicated and use
wall plugs and screws*
Remove lid on the side if connected
to 20mm conduit
*supplied screws and wall plugs are suitable for masonry only.
6: Complete lablels
-
Enter installation date on battery label
-
Enter
Operating
temp. ta
REM10*
0°C - 40°C
REM10*
REM10*
0.5Nm
3-4mm
Please purchase alternative fixings if required.
Part No.:
Input voltage: 220-240V AC 50Hz
X
0
180
Installation date: __ / __ / ____
the appropriate
code on the luminaire label
lssue V1: 5/1/2020
Net
weight
0.3kg