Daintree GE Current Lumination Tetra Contour 74917 Series Manuel d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Daintree GE Current Lumination Tetra Contour 74917 Series. Daintree GE Current Lumination Tetra Contour 74917 Series 2 pages. Led luminaire

Imprimer la page
Lumination
Product Code: 74917
Description Code: GE020/G/V24T1-B
(Tetra
Contour)
®
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Risk of electrical shock. Disconnect power before servicing
or installing product.
LED Driver Features
• Class 2 wiring per NEC Article 725 (SELV)
• IP54: Dry or damp location rated
• Conforms to the following standards
This Class [A] RFLD complies with the Canadian standard ICES-005. Ce DEFR de la classe [A] est conforme à la NMB-005 du Canada.
Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
LED Luminaire
®
WARNING / AVERTISSEMENT
Risque de choc électrique. Couper l'alimentation avant le dépannage
ou avant l'installation du produit.
Prepare Electrical Wiring
Electrical Requirements
• The LED driver must be supplied with 120V, 60Hz
or 240V, 50Hz and connected to an individual
properly grounded branch circuit, protected by a
15 or 20 ampere circuit breaker.
Grounding Instructions
• The grounding and bonding of the overall system
shall be done in accordance with National Electric
Code (NEC) Article 600 and local codes.
Installation Guide
ARCH027