Daintree DT108 Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Daintree DT108. Daintree DT108 4 pages. Wireless occupancy sensor, ceiling mount

Imprimer la page

Daintree

Networked Wireless Occupancy Sensor, Ceiling Mount (WOS2-CM)

Placement (continued)

• The PIR sensor must have clear line of sight to the coverage area.

It may not detect a human body if it is blocked by furniture,

fixtures, large plants, glass, curtains, etc.

• Install the detector securely to the ceiling to minimize sensor

vibration. The PIR sensor should not be installed on moveable

objects, nor exposed to direct sunlight. The resulting hot air and/

or motion can cause false activation.

Coverage Pattern, WOS2-CM-E, Extended Coverage

Installation Height

10' (3m) from floor

Detection Angle

120°

Detection Radius

up to 17' (5.2m)

Adjustments

Two trimpots next to the

battery compartment are

used to adjust the Daylight

Hold-Off threshold

and PIR motion

sensor sensitivity

Use caution when

adjusting the trimpots.

Do not use excess force,

as this will

damage the unit.

Stop turning

the trimpot when

you feel resistance.

PIR Sensitivity

Turn the trimpot clockwise

to increase sensitivity.

Turn the trimpot counter-clockwise

to decrease sensitivity.

Installation Guide

Minimum

Maximum

(counter-

(clockwise)

clockwise)