Daintree GE current WHS100 Manuel d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Daintree GE current WHS100. Daintree GE current WHS100 9 pages. Wireless high bay sensor
Imprimer la page
Daintree
Wireless High Bay Sensor (WHS100)
®
6
Wiring for Emergency Lighting (Cont'd)
7
Lens Coverage Options
The PIR sensor is an indoor/outdoor device. It comes with a 40 ft
lens pre-installed, two optional lenses, and a coverage mask for
use in various applications. Select the appropriate lens for the
mounting height and desired coverage area. The optional lenses
are marked on the flange with LOW and MED for identification.
LOW bay: Height=8 ft / Coverage radius=20 ft
MED bay: Height=20 ft / Coverage radius=30 ft
High bay (unmarked): Height=40 ft / Coverage radius=30 ft
Use the mask to avoid occupancy triggers from activity outside
the desired coverage area. Insert the mask between the inside of
the lens and the inner layer of the gasket (not outside the gasket).
8
Changing the Lens
To maintain waterproofing a 2-layer gasket is fitted around the
edge of the lens before securing the lens assembly to the sensor.
1. Remove the pre-installed lens from the lens assembly on the
sensor.
2. Remove the lens gasket from the pre- installed lens.
3. Tuck the edge of the optional lens into the inner edge of the
gasket, between layers.
4. Align the 4 holes on the gasket with the holes on the lens.
5. Align the holes on the lens with the studs on the inside of the
cover and press the gasket assembly in place.
6. Place the lens assembly on the sensor and rotate the cover
assembly clockwise to tighten it .
Lens
Cover
Gasket
Utility Button
PIR Sensor
Element
DO NOT
TOUCH
Network and Motion
Detection/Test Mode
Indicators
4
Installation Guide
2-Layer
Lens
Gasket
ID: Low/Med
No Mark=High
Lens Assembly
Locking Tabs
Sensor Base