Daintree GE Lumination LSA T1 Manuel d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Daintree GE Lumination LSA T1. Daintree GE Lumination LSA T1 8 pages.

Imprimer la page

OPTION B - ENCLOSED SENSOR INSTALLATION

SENSOR ACCESSORY INSTALLATION WITH GE CURRENT LED FIXTURE (SQ OPTION)

COMPONENTS REQUIRED

Materials to be supplied by

installer:

• Standard electrical enclosure

box (UL listed)

• Electrical conduit (UL listed)

Mounting Option – When conduit is required by

code

MOUNT ELECTRICAL BOX

Mount the electrical box to the ceiling following

appropriate codes.

CONNECT SENSOR

Use supplied cover

plate and attach

sensor. Once

connected to cover

plate, connect the

sensor to the

sensor cable.

Materials ordered separate

as an accessory from

Current:

• Cover plate and mounting

screws

CREATE HOLE IN CEILING

Make hole in ceiling to accommodate a standard

UL listed electrical enclosure compatible with

cover plate.

INSTALL SENSOR ON COVER

PLATE

Place sensor cable

into appropriate

sized electrical

conduit per code.

If sensor

connector does

not fit conduit

diameter, cut and

splice sensor cable

wires following

appropriate codes.

ATTACH COVER PLATE

Use supplied screws to attach cover plate to

electrical box. Installation is complete.