Daintree WWD2-4IW Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Daintree WWD2-4IW. Daintree WWD2-4IW 8 pages. Wireless controls wireless scene switch

Imprimer la page
Daintree® Wireless Controls
Wireless Scene Switch(WWD2-4IW)
Installation of Back Housing onto Junction Box
Disconnect power to
1
the junction box
4
Terminate wires (previously
connected to wall switch)
with wire nuts.
DOUBLE CHECK PRODUCT ORIENTATION BEFORE BREAKING OFF TABS.
The wall dimmer will only install into the back housing in one orientation.
Break off tabs only after the correct product orientation has been confirmed.
Remove the junction box
2
cover plate
5
For proper installation into
a dual gang junction box, the
tabs between adjacent back
housings must be removed.
Carefully observe the correct
orientation (the UP arrow
should be in the upper right
corner on each back housing).
After double checking the
product orientation, break off
the necessary tabs using pliers.
2
Installation Guide
3
Uninstall existing wall
switches from the junction
box.
6
Install the back housing(s)
of the wall dimmer(s) into
the wall box.