Anritsu Company ShockLine MS46524B Series Manuel de démarrage rapide - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Anritsu Company ShockLine MS46524B Series. Anritsu Company ShockLine MS46524B Series 20 pages. Vector network analyzers verification kits and performance verification software
Imprimer la page
7. Starting Performance Verification Testing
Close/Finish/View Data Report
You can close a session and continue later, or finish a session when all testing is complete and then view the
testing data results.
1. Close Session – Closes and saves the test session.
2. Finish Session – Closes and finishes the test session.
3. View Data/Report – View the testing results
Figure 19. Close/Finish/View Report
Close Session
Closes the test session and saves the session so that it can be restarted at a later time. This is useful if the tests
can not all be run at the same time or if testing must be interrupted for some reason. To resume testing,
connect the unit and click the Start Session button.
1. Select Close Session if rerunning tests or completing the testing later.
•
A Remove DUT dialog box will display.See
2. Select Yes to remove the DUT or No to continue testing the existing DUT.
Figure 20. Remove DUT
Finish Session
Current test results are saved and can be referred to at a later time. Subsequent testing can be performed in a
new test session and the results of those tests will not replace the current test results. This is useful when a
record of the verification test results at a particular time is required.
Once the Performance Verification is complete:
1. Select Finish Session.
• A dialog box will appear if testing is complete or that not all tests have run as is shown in
Figure
22.
2. Select View Data/Report to view the test data results.
QSG-16
Figure
20.
PN: 10410-00766 Rev. B
2
1
3-2300-610 Verification Kits/PVS QSG
3