DAIRY EQUIPMENT Dari-Kool Manuel d'instruction - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DAIRY EQUIPMENT Dari-Kool. DAIRY EQUIPMENT Dari-Kool 14 pages. Bulk milk cooler
Imprimer la pagef. If
spots or discoloratin!1 occurs on any stainless finish.
they usuall
can he remn eel by using a cleansin
pow
der on a damp raIl.
If a
leanser is used be sure and
go with the grain of the teeI or you will change the
finish.
There may be instances wh
r
spot removal
will not be successful.
In
thes.e instan" , cl1f'ck with
your local grocer who can usually recommend a cleaner
and stain remover which will take care of the spots
or discoloration.
STERILIZING METHOD
The tank should be sterilized just prior to adding milk.
We
recommend that a sanitizer be used as they spray a fine mist
of proper mixture on all
surface~
and assure you of proper
sterilization. Check with your field man for his recommended
sterilizing compound.
(See approved sterilizers list).
CAUTION:
If cleansers or sterilizing cornpounds are not used accord
ing to recommendations of the maker you can damage stain
less surfaces.
Alkaline cleansers or acid cleansers should
be thoroughly rinsed
off
after use.
Sterilizers can discolor stainless if misused, or when con
taminated with acid cleaners.
Follow the maker's recom
mendations for proper usage.
Do not leave sterilizing solu
tion in a tank for more than :3 h01lr.
Drain the tank com
pletely and thorouiYhly.
Rinse with clean water, unless used
immediately after sterilizing.
CARE AND MAINTENANCE OF VALVE A D FITTINGS
Valves and fittings must he ca.refully handled if they are
to give a satisfactory service life without unnecessary repairs
or replacement. Listed are important points to keep in mind.
1. Valves or fittings should nf'ver be thrown into wash
vat or handled roughly.
Extreme care should be used
when removing valve to avoid dropping on concrete
floor as nicks will cause leaks.
2. Never use steel wool for cleaning fittings or valves.
3. Never leave fittings or valves in cleaning solution
longer than necessary.
This can cause discoloration.
4.
~ever
place fittings or valves in solution in a tinned
or galvanized receptacle.
If this is done di, oloration
will occur.
- 9