DSC Escort5580 Voice Assisted Security Control Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DSC Escort5580 Voice Assisted Security Control. DSC Escort5580 Voice Assisted Security Control 17 pages. Voice assisted security control

Imprimer la page
DSC Escort5580 Voice Assisted Security Control Manuel de l'utilisateur
Accessing Your Security System
Local Access
Use this procedure to access your security system from a telephone that is on the same phone line
as your security system. No dialing is necessary.
Pick up the telephone; you will hear a dial tone. Enter your [Local or Remote Telephone Access
Code]. The dial tone will stop and the system will announce
Depending on the feature activated for your system, the system may then announce
Enter your [Access Code].
Remote Access
From a touch tone telephone, call the security system and let the line ring once. After a single ring,
hang up and call again. On the second call, the system will pick up after one or two rings and
announce
Enter your [Local or Remote Telephone Access Code] within 10 seconds or the system will
automatically hang up.
The system will then announce
Enter a valid access code within 20 seconds or the system will hang up. The system will also hang
up if 3 incorrect Access Codes are entered.
Once a valid access code has been entered, the system will announce one or more messages to
advise of the status of the system.
Accessing Partitions
• What is a Partition?
A partition is a group of zones which act independently of other groups of zones. Each partition
acts as an independent alarm system. Partitions will have different access codes to arm and
disarm them. The access codes assigned to one partition will not work on another partition.
However, Access Codes can be assigned to more than one partition to allow someone to use one
Access Code for several different partitions. Your installer will inform you of how partitions and
Access Codes have been assigned on your system.
Note: Be sure to have your installer explain to you if your system is a Single or Multiple
Partition system.
2
"Hello"
"Hello"
"Hello"
"Hello"
"Hello"
"Enter Your Access Code".
"Enter Your Access Code".
"Enter Your Access Code".
"Enter Your Access Code".
"Enter Your Access Code".
"Hello"
"Hello"
"Hello"
"Hello"
"Hello"
"Enter Your Access Code"
"Enter Your Access Code"
"Enter Your Access Code"
"Enter Your Access Code"
"Enter Your Access Code"