DSC Escort5580 Voice Assisted Security Control Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DSC Escort5580 Voice Assisted Security Control. DSC Escort5580 Voice Assisted Security Control 17 pages. Voice assisted security control

Imprimer la page

DSC Escort5580 Voice Assisted Security Control Manuel de l'utilisateur

Utility Output Feature

The Utility Output feature allows you to activate a programmable output on the main alarm control

panel. This output can be used to temporarily open magnetically locked doors, or perform any

function that requires a pulse of voltage to operate it.

Activating the Utility Output

With the system armed or disarmed, access the security system using the steps described in the

Accessing Your Security System sections of this manual.

Select a partition as explained in the accessing partitions section of this manual.

Press the [ ] key . You will hear the prompt.

Press the [7] and [1] keys. If an access code is required to perform Utility Output you will hear.

The system will then announce.

The system will then return to the main menu.

Note: {Utility Output} is a programmable label, be sure to ask your installer what the label has

been programmed as.

Sensor Reset Feature

The sensor reset function is used to reset latching devices, such as smoke detectors. Your installer

will inform you of how and when to use this function.

How To Reset Sensors

With the system disarmed, access the security system using the steps described in the Accessing

Your Security System sections of this manual.

Select a partition as explained in the accessing partitions section of this manual.

Press the [ ] key . You will hear the prompt.

Press the [7] and [2] keys. If an access code is required to perform Sensor Reset you will hear.

The system will then announce.

The system will then return to the main menu.

Note: {Sensor Reset} is a programmable label, be sure to ask your installer what the label has

been programmed as.

" For {Utility Output}, press [7] then [1]"

"Enter your access code"

"{Utility output} in progress"

" For {sensor reset}, press [7] then [2]"

"Enter your access code"

"{Sensor reset} in progress"