Daisy DPSQ1251 Instructions d'installation

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Daisy DPSQ1251. Daisy DPSQ1251 4 pages. Daisy power series pool cover roller

Imprimer la page
Installation
Instructions
Page 1
daisy
P O W E R
1.
Wrap paper template
around roller tube, the end you
want to install the Daisy Power
motor and controls
2.
Without the drive motor
inside the tube, mark and drill
the 6 x 4.5mm holes through
the template with the 4.5mm
drill bit (3 around the end of the
tube and 3 around the inside
of the tube approximately
243mm from end of tube)
3.
Insert the drive motor, (if
there is a feather plug in way,
remove, then replace after
motor install) then using the
4.5mm drill again, drill through
the 6 holes in the tube, through
the drive motor flange
pool covers & rollers
daisy