DSC PC5010 V2.0 Manuel d'instruction - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DSC PC5010 V2.0. DSC PC5010 V2.0 18 pages.
Programming codes from an LCD Keypad:
Master Code
Press the [ ] key to enter the function list. Scroll (< >) to...
Press [5] or [ ]. The display will read...
Press (*) for<>
Access Codes
Enter your current Master Code. The display will read...
Enter Master
Access Code
"01P" represents the first access code. Use the arrow (< >) keys to scroll to "40P"
(*) to Edit < >
and press the [ ] key to indicate that you wish to program the Master Code. The
User Code
01P
display will read...
Enter the new Master Code. The Master Code must be four digits unless otherwise
Enter New Code
indicated by your installer. Enter digits 0 through 9 only. Once the new code is
1234
< >
entered, the keypad will beep 3 times and the display will read...
Press [#] to exit the code programming function.
(*) to Edit < >
User Code
01P
Be sure to record your new Master Code on the "System Information" page in this booklet. NOTE: We
recommend that the factory default Master Code [1234] not be used.
Additional Access Codes
To erase, add or change a user code, press [ ] to enter the functions list. Use the arrow (< >) keys to
scroll to the following message...
Press [ ]. Display will read...
Press (*) for<>
Access Codes
Enter the Master Code. Display will read...
Enter Master
Access Code
Use the scroll keys (< >) to find the access code – indicated by "01P" to "32P" –
[*] to Edit
<>
you wish to add, change or delete. Press the [ ] key to select the code you wish to
User Code
01P
alter. The display will read...
To add or change a code, enter the new code. Access codes must be four digits
Enter New Code
unless otherwise indicated by your installer. Enter digits 0 through 9 only. To delete
1234
< >
an access code, enter [ ]. Once the 4 digit code or [ ] has been entered, the
keypad sounder will beep 3 times and the display will read...
The "P" means the code has been programmed. If there is no "P" then that code is
[*] to Edit
<>
deleted. Press [#] to exit the code programming function. The Master Code cannot
User Code
01P
be erased.
Remember to record your new code(s) on the "System Information" page in this booklet.
Access Code Attributes
Additional programmable attributes, such as zone bypassing capability, can be activated or
deactivated for each access code. For more information regarding access code attributes, please
contact your installer.
10