DAITEM SH146AX Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DAITEM SH146AX. DAITEM SH146AX 18 pages. External detector antimask

Imprimer la page

3. Recognition programming

IMPORTANT: the device does not need to be

placed close to the control panel for

recognition programming. In fact, we advise

you to move the product at least 2 metres

away from the control panel.

1. Put the control panel in installation mode

by entering the following:

master code

then:

installer code

2. Proceed as follows to programme the detector to be recognised by the control panel.

"detector X"

then

10 s max.

Press and hold the

Press

then

"test" button until

on the control

the control panel

panel keypad

responds

IMPORTANT: the control panel indicates there is an error by emitting 3 short beeps.

When this happens programming should be carried out again.

"group?"

"time delay?"

The control panel

Select the time delay:

waits for a group

0: immediate

to be chosen (from

1: delayed

1 to 8)*. Choose

2: combined

the groups by

Use the control panel

pressing the

keypad to do this.

corresponding

numeral on the

control panel keypad

* Depends on the type of the control panel

"beep, detector X,

group Y, immediate

(or delayed

or combined)"

The control panel

gives a voice

message to

confirm