DAITEM SH401AX Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DAITEM SH401AX. DAITEM SH401AX 9 pages. Indoor siren

Imprimer la page

4.10 Radio tamper

If the radio links are deliberately tampered with, the siren is triggered.
To activate or deactivate the radio tamper system, enter:
siren n°
Factory setting: 1
4.11 Allocation of siren to alarm group
To allocate the siren to one or several alarm system groups,
enter:
siren n°
Factory setting: all groups
4.12 Checking
To check parameter-setting, enter:
siren n°
parameter
n°

4.13 Deletion of parameters

• To delete a parameter, enter
siren n°
parameter

5. Installing the siren

5.1 Choosing the best place to install the siren
IMPORTANT: make sure there is a distance of at least
2 metres between each product, except between two
detectors.
5.2 Testing the radio range
Before fixing the siren in place, test its radio range in the chosen location by putting it there.
If the test is satisfactory, fix the siren in place. Otherwise, move it to a different location.
1. Press the test button.
0: disabled
1: enabled
...
groups from 1 to 8 depending
on the type of control panel
n°
Example: to allocate siren n° 1 to Group 2 and Group 3,
enter:
Example: to check on siren n° 1, lparameter 4: duration of
sounding, enter:
• To delete all parameters, enter:
siren n°
The siren should preferably be placed:
• at a height,
• far away from possible sources of electrical interference
(electricity meter, telephone box, etc.).
Never fix the siren to a metal wall.
2. The control panel issues the message:
5
"4, bip, 9, 0"
"bip, siren X"