DAITEM 155-21X Manuel d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DAITEM 155-21X. DAITEM 155-21X 20 pages. Radio heat sensor

• in rooms where the relative humidity might

rise above 95% (without condensation),

• close to heating, cooling or air vents.

Mounting examples:

Fig. 1

d > 50 cm

plafond

Recommended

Fig. 2

d > 50 cm

4.2 testing the radio range

at the chosen location

iMPoRtAnt: the control panel must be in

installation mode to perform this test (see

Recognition programming).

1. Hold down the detector programming key

0 or the test button until the built-in

sounding can be heard:

• correct: the control panel conﬁrms the

radio link with a voice message "beep,

ﬁre detector n° X",

• incorrect: if there is no voice message,

move the heat detector closer to the

control panel.le.

2. Put the control panel back in user mode by

pressing:

engineer installer code