DSC PowerSeries PC1832 Manuel d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DSC PowerSeries PC1832. DSC PowerSeries PC1832 13 pages. System
enhancement
module
Également pour DSC PowerSeries PC1832 : Manuel d'installation (17 pages), Manuel d'installation (20 pages), Manuel (18 pages)
Imprimer la page
Ground
Ground Installation
Tighten nut to break paint and make
good connection to the cabinet
Battery
Standby Battery Guide
Battery Charging Current: 400 mA
Battery
Standby
Size
4Hr
24Hr
4A
700mA
----
7A
700mA
180mA
14A
700mA
470mA
NOTE: Battery capacity will
deteriorate with age and the number of
charge/discharge cycles. Replace every
3-5 years.
AC Wiring
AC Wiring (UL Listed Installations)
Primary: 120VAC/60Hz./0.33A
Secondary: 16.5VAC/40VA DSC PTD1640U, DSC PTC1640U,
DSC PTD1640U-CC Plug-in, Class 2 Transformer.
NOTE: Use DSC PTD1640 for Canadian installations.
NOTE: For UL Listed installations, do NOT connect transformer to a receptacle controlled by a switch.
PowerSeries PC1616/PC1832/PC1864 Installation Guide
A sealed, rechargeable, lead acid battery or gel type battery is required to meet UL requirements for power standby
times.
NOTE: UL Residential/Commercial Burglary installations require 4 hours of standby battery time.
NOTE: UL/ULC Residential Fire & Health Care installations require 24 hours of standby battery time. ULC
Commercial Burglary and Fire monitoring installations require 24 hours of standby battery time plus 5 minutes of
alarm condition.
NOTE: UL Holdup Alarm installations require 8 hours of standby battery time. Use control panel only in conjunction
with 7Ah or 14Ah batteries (700mA loading on AUX output).
- 6 -