ansio ANSIO1012 Instructions et manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Instructions et manuel d'utilisation pour {nom_de_la_catégorie} ansio ANSIO1012. ansio ANSIO1012 8 pages. 16” pedestal fan 3 in 1 with remote

Imprimer la page
FAN DISPLAY
The fan display will show the speed level or the timer duration along with timer symbol
activated.

TIMER SETTING

Turning the Timer ON:
Press and hold the Speed button
function ON. Alternatively, press the TIMER button
Stop Timer: When the fan is ON, start the timer as above. Using the speed button on the
control panel or the timer button on the remote, choose the time after which you would like
the fan to switch OFF. The timer can be set from 1 hour to 8 hours in increments of 1 hour.
Delay Start Timer: When the fan is OFF, press and hold the Speed button
control panel of the fan to turn the Timer function ON. Use the speed button on the control
panel to choose the time after which the fan will switch ON.
Alternatively, press the TIMER button
button on the remote to choose the time after which the fan will switch ON. The timer can
be set from 1 hour to 8 hours in increments of 1 hour.
Turn the Timer OFF:
Press and hold the Speed button
shows "0" to turn the Timer function OFF. Alternatively, press the TIMER button
remote until the fan display shows "0" to turn the timer OFF.

CARE AND MAINTENANCE

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to a qualified service
personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free
of dust. Do not disassemble the fan to remove dust.
3. Please Wipe the exterior parts with a soft cloth soaked in a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
5. Do not use any of the following as a cleaner: gasoline, thinner, bending.
6. Do not let water or any other liquid enter into the motor housing or interior parts.
7. When not in use, store the fan (preferably in its original box) in a cool, clean and dry
location.
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moistened with mild soap. Thoroughly
remove the soap film with dry cloth.
Customer Support - UK Toll Free 0800 080 6781 or +44 207 157 9795
Page |
6
on the control panel of the fan to turn the Timer
on the remote to start the timer. Use the timer
on the control panel of the fan until the fan display
on the remote to start the timer.
Model:ANSIO1012 (Nov'21v.02)
if
on the
on the