DSC PowerSeries PC1864 Manuel d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DSC PowerSeries PC1864. DSC PowerSeries PC1864 20 pages. System enhancement module
Également pour DSC PowerSeries PC1864 : Manuel d'installation (17 pages), Manuel d'installation (13 pages), Manuel (18 pages)

DSC PowerSeries PC1864 Manuel d'installation

STEP 5: WIRE THE SEM TO THE PANEL

Verify panel AC power is removed and
the backup battery is disconnected.
SEM
+12V
YELLOW (IN)
GREEN (OUT)
GND
Connect panel terminal SEM GND to BLK.
Connect panel terminal
Connect panel terminal
Use the included red cable with the two prong battery connector
to connect the battery to both the SEM and the panel. For a power-
limited circuit, ensure the fuse is inside the PowerSeries panel.
Once wiring is complete, route the antenna(s) outside of the enclosure,
away from the SEM, and replace the enclosure cover. Please note that
the antenna(s) should be routed through the second and third channel
openings at the top of the enclosure (see below).
CDMA/HSPA
Modules
8
YELLOW (IN)
to YEL.
GREEN (OUT)
to GRN.
LTE Modules
12V Battery
RED
BLK
YEL
GRN
PowerSeries Panel