FoxESS S-BOX Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} FoxESS S-BOX. FoxESS S-BOX 12 pages.

5.3 Tools Required

Manual wrench;

Electric drill (drill bit set 8mm);

Crimping pliers;

Stripping pliers;

Screwdriver.

5.4 Installation Steps

Prepare 4 fixed blocks. The four fixing blocks are locked on the box body with M5 self-tapping screw.

Choose the place you want to install the S-BOX. Place the S-BOX on the wall and mark the position

of the 4 holes from fixing blocks.

Drill holes with electric drill, make sure the holes are at least 50mm deep, and then tighten the

expansion tubes.

Insert expansion tubes into the holes and tighten them. Install the fixing blocks with expansion screws.