DSC TL280R Manuel d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DSC TL280R. DSC TL280R 16 pages. Internet alarm communicator - international
Également pour DSC TL280R : Manuels d'installation (17 pages), Manuel d'installation (16 pages)

Imprimer la page

Ethernet Programming Options

Table 6: Trouble indications

Trouble

Indicator

indication

Digit

Red and Yellow

LEDs flashing

N/A

together

The programming sections described in this document can be viewed at the keypad LCD. To start

programming enter: [*][8][installer code][851][section number], where section number is the 3

digit section number referenced in this section. The programming worksheets at the end of this

document can be used to record the new values when programming changes have been made from

the default values.

Possible

Causes

• The unit is still initializing please wait while the unit gets its programming

Initialization

and establishes a connection to all programmed receivers.

Sequence

NOTE: This process may take several minutes to complete.

• If the initialization sequence is taking more than several minutes, the boot

loader might have failed.

• Confirm that the boot loader has failed by entering communicator program-

Boot Loader

ming [*][8][installer code][851].

Failed

• If access is granted, continue waiting for the initialization sequence to com-

plete.

• If access is denied (long error tone), disconnect power from, then recon-

nect power to the communicator module.

THERNET

ROGRAMMING

Internet Alarm Communicator Installation Guide

Trouble Possible Solution

PTIONS