FoxESS A7300P1-E1-S Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} FoxESS A7300P1-E1-S. FoxESS A7300P1-E1-S 17 pages. Ev charger
Imprimer la page
Symbols
Symbol Explanation CE mark. The charger complies with the requirements of the
applicable CE guidelines.
Beware of hot surface. The charger can become hot during operation. Avoid contact
during operation.
Danger of high voltages.
Danger to life due to high voltages in the charger!
Danger.
Risk of electric shock!
Read the manual.
Product should not be disposed as household waste.
2. Safety
FoxESS EV chargers are designed and tested in accordance with international safety requirements.
However, certain safety precautions must be taken when installing and operating this. The installer
must read and follow all instructions, cautions and warnings in this installation manual.
All operations including transport, installation, start-up and maintenance, must be carried out by
-
qualified, trained personnel.
The electrical installation & maintenance of the charger shall be conducted by a licensed
-
electrician and shall comply with local wiring rules and regulations.
Before installation, check the unit to ensure it is free of any transport or handling.Unauthorized
-
removal of necessary protections, improper use, incorrect installation and operation may lead
to serious safety and shock hazards or equipment damage.
Do not install the equipment in adverse environmental conditions such as in close proximity to
-
flammable or explosive substances; in a corrosive or desert environment; where there is
exposure to extreme high or low temperatures; or where humidity is high.
Do not use the equipment when the safety devices do not work or are disabled.
-
Use personal protective equipment, including gloves and eye protection during the installation.
-
Inform the manufacturer about non-standard installation conditions.
-
Do not use the equipment if any operating anomalies are found. Avoid temporary repairs.
-
All repairs should be carried out using only approved spare parts, which must be installed in
-
accordance with their intended use and by a licensed contractor or authorized FoxESS service
partner.
Liabilities arising from commercial components are delegated to their respective manufacturers.
-
Explanation
2