Anslut 019926 Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Anslut 019926. Anslut 019926 19 pages. Work lamp with magnification led

Imprimer la page
PRODUCT INFORMATION SHEET
Supplier's name or trademark:
Supplier's address (
a
):
Model identifier:
Type of light source:
Lighting technology used:
Light source connected to mains supply or
light source not connected to mains supply:
Colour-tuneable light source:
High luminance light source:
Anti-glare shield:
Parameter
Energy consumption in on-mode (kWh/1000 h)
Useful luminous flux (Φ
), indicating if it
use
refers to the flux in a sphere (360˚), in a wide
cone (120˚) or in a narrow cone (90˚).
On-mode power (P
), expressed in W.
on
Networked standby power (P
) for CLS,
net
expressed in W and rounded to the second
decimal.
Outer dimensions without
separate control gear, lighting
control parts and non-lighting
control parts, if any (millimetre).
Claim of equivalent power (
)
c
Peak luminous intensity (cd)
Parameters for LED and OLED light sources:
R9 colour rendering index value
The lumen maintenance factor
Parameters for LED and OLED mains light sources:
Displacement factor (cos φ1)
Claims that an LED light source replaces a
fluorescent light source without integrated
ballast of a particular wattage.
Flicker metric (Pst LM)
(a)"-": not applicable;
(b)"-": not applicable;
Anslut
Jula AB, Julagatan, 2, 53237 Skara, SE
019926
LED
MLS
no
yes
yes
Product parameters
Value
General product parameters:
6
450 in wide cone (120°)
6
-
Height
380
Width
320
Depth
220
-
Parameters for directional light sources:
193
18
0,96
0,50
-
(b)
1,0
Non-directional or directional:
Connected light source (CLS):
Envelope:
Dimmable:
Parameter
Energy efficiency class
Correlated colour temperature, rounded to
the nearest 100 K, or the range of correlated
colour temperatures, rounded to the
nearest 100 K, that can be set.
Standby power (P
), expressed in W and
sb
rounded to the second decimal.
Colour rendering index, rounded to the
nearest integer, or the range of CRI-values
that can be set.
Spectral power distribution in the range
250 nm to 800 nm, at full-load.
If yes, equivalent power (W)
Chromaticity coordinates (x and y)
Beam angle in degrees, or the range of
beam angles that can be set
Survival factor
Colour consistency in mcadam ellipses
If yes then replacement claim (W)
Stroboscopic effect metric (SVM)
EN
DLS
no
no
no
Value
F
6 500
0,00
80
see graph
-
0,313
0,337
120
0,90
6
-
0,9
7