Anslut 013943 Manuel d'utilisation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Anslut 013943. Anslut 013943 20 pages.

under the suspension point.

Check that the snap hooks are properly

closed and that the infrared heater is firmly

fixed. It must not drop, slide or move.

FIG. 5

IMPORTANT:

There must be a free space of at least 40 cm

between the cover plate and ceiling, tent fabric

or other objects.

Connection to mains

Route the power cord along the chain and

fasten with cable ties. The first cable tie is

fastened in the third link from below – the

bottom links get hot.

Do not allow the weight of the appliance to

stretch the power cord.

Route the power cord to a suitable power

point.

FIG. 6

USE

NOTE:

The first time the infrared heater is switched on,

or if it has not been used for some time, it may

smell a little. This is normal and soon stops.

Switch on the infrared heater by pulling the

pull switch.

Switch off the infrared heater by pulling the

pull switch.

MAINTENANCE

•

Unplug the plug and allow the infrared

heater to cool before cleaning.

•

Clean the outside with a damp cloth and

wipe dry with a dry cloth.

•

Do not use detergents or abrasive agents.

Make sure that no water gets into the

infrared heater.

Storage

Store the infrared heater unplugged from the

mains in a dry, clean and dust-free place.