Anslut 411-123 Manuel d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Anslut 411-123. Anslut 411-123 12 pages. Heater fan, 2 kw
Imprimer la page
Mains voltage
Output
Power levels
Temperature
Protection rating
Dimensions
Weight
Fuse
Cable length
IMPORTANT:
Observe the following safety distances between the fan and other objects:
Side
50 cm
Above
50 cm
Front
180 cm
1.
Stand the fan upright on a flat surface at a safe distance from flammable objects.
2.
Connect the heater fan to the mains supply.
3.
Set the thermostat (2) to MAX and turn the output knob (1) to 2000 W. When the required room
temperature has been reached, turn the thermostat knob anti-clockwise until the thermostat
switches off.
4.
The thermostat will now turn the heat on/off automatically to regulate the room temperature to the
set value.
5.
When the heater fan is used for the first time, it may emit some smoke. This is normal and stops
after a while. The smoke comes from the thin coat of protective oil which is applied to the heater
element during manufacture.
Disconnect the mains voltage and allow the fan to cool before cleaning.
Wipe the outside with a soft cloth dampened with a mild soap solution. Take care to ensure that no
water gets inside the heater fan. Wipe with a dry cloth.
Never use petrol or solvents to clean the heater fan.
Allow the fan to cool before storing it. Place the fan in a dry, ventilated area.
ENGLISH
TECHNICAL DATA
OPERATION
1
MAINTENANCE
11
230 V/50 Hz
2000 W
x 3: 650 W, 1300 W and 2000 W
Adjustable 0-85C
IPX4
W200xH315xD200 mm
4.0 kg
Minimum 10 A
1,8 m
2