Anslut 012425 Manuel d'utilisation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Anslut 012425. Anslut 012425 12 pages. Floodlight with motion detector
Imprimer la page
EN
with the two screws.
FIG. 4
6.
Hold the lamp flush with the wall bracket
and tighten the screw.
FIG. 5
USE
SETTINGS
The light function on the product is set with
two control dials on the top of the motion
detector.
Light sensitivity (LUX)
1.
If the dial is turned to maximum the light
will go on in almost all light conditions,
from twilight to full daylight.
2.
If the dial is turned to minimum the light
will only go on in the dark. This is in most
cases the best setting when the light
is only needed during the evening and
night.
FIG. 6
Lighting-up time after detection
of movement (TIME)
1.
This dial sets the delay before the light
switches off – the time during which the
light remains on after the motion detector
has detected movement. The time can be
set from 3 seconds to 7 minutes. Turning
the dial clockwise results in a longer
lighting-up time.
FIG. 7
2.
After setting, turn the motion detector so
that the front of it (see arrow) is facing
the required detection area.
FIG. 8
12
3.
Angle and/or carefully turn the lamp
housings to point them at the area to be
illuminated.
MAINTENANCE
Wipe the lamp with a soft, lightly moistened
cloth. Do not use detergent or solvent.
REPLACING THE BATTERY
•
Only use new batteries.
•
Do not mix old and new batteries.
•
Do not mix alkaline batteries with other
types of batteries, for example rechargeable
batteries with non-rechargeable batteries.
•
Insert the batteries with the correct
polarity.