Daiwa DWA-9150 Instructions d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation pour {nom_de_la_catégorie} Daiwa DWA-9150. Daiwa DWA-9150 14 pages. Legacy 3d massage lounger
Imprimer la page
SETUP
7. Installing all other units
Connect the controller to its corresponding port on the power supply box.
Insert the power plug of the chair into a wall outlet, then turn on power to return the
chair's backrest to its upright position.
Controller
After all parts assembled, please insert the power cord into the power socket,
and then turn on the switch, press the power on the remote control to start
massage.
Power cord
Power cord port
Power On/Off
Power cord connector
Controller plug
17
SETUP
MOVING THE MASSAGE CHAIR
Make sure that the backrest is in its highest upright position.
Shut off power and remove the power plug from the wall outlet.
Standing behind the back of the chair, grasp its backrest and tilt it downward, so
that the front of the chair rises off of the floor. Push the chair to the location you
desire. Move the chair by the wheels.
CAUTION
Do not try to carry the chair on your own.
Do not attempt to move the chair while someone is still sitting on it.
While moving the chair, always grasp its backrest. Do not try to move the chair by
grasping its armrests.
Before plugging it in, inspect the entire power cord and plug for any possible
damage. Make sure that no electrical wires are exposed.
Make sure that the power supply switch is turned OFF before inserting the power
plug into a wall outlet.
18