Anslut 427632 Manuel d'utilisation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Anslut 427632. Anslut 427632 18 pages.

Loosen the stud bolt before rotating the PIR sensor.

Adjust the sensor range by rotating the PIR sensor and floodlight.

Adjusting duration: turning the TIME knob from (-) to (+) will increase the duration (Fig. 4).

LUX setting: daytime mode shows that the PIR sensor will switch the floodlight on round the

clock, while night mode means that the PIR sensor will only switch the floodlight on during

darkness (Fig. 4).

Adjusting sensitivity: turning the SENS knob from (-) to (+) will increase detection sensitivity

(Fig. 4)

Walk test: determine the detection range by conducting a walk test. When the PIR sensor

detects a triggering signal within the detection range (a moving person, for instance), the

floodlight switches on and shines for the duration of the pre-set time. Set the LUX knob to

daylight mode and the TIME knob to the shortest time possible (all the way to -) during the

walk test.

180°

5 m

10 m 12 m

1. Stud bolt

2. SENS

3. TIME

4. LUX