Foxfury Lighting Solutions TACSWAN EXOLANDER 700-XLS-M3 Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Foxfury Lighting Solutions TACSWAN EXOLANDER 700-XLS-M3. Foxfury Lighting Solutions TACSWAN EXOLANDER 700-XLS-M3 16 pages. Systems for dji mavic 3

Imprimer la page
EXOLANDER

INSTALLATION

❶ Install Saddle Mount
1.
Slide the Saddle Mount
front tabs fit behind the front arms of the DJI and press down.
Insure that the front and rear tabs of the Saddle Mount
securely to the body of the DJI.
Do not pull/spread the saddle excessively during installtion. The
Saddle Mount
❷ Install EXOLANDER
1.
Place the drone and Saddle Mount upside down on a flat surface.
2.
Align the EXOLANDER
Mount
below. Make sure the foot is facing away from the center of the
drone. Tilt the EXOLANDER
6
©
©
on the DJI.
is intended to be pushed into place.
©
©
on Saddle Mount
©
and slide in the EXOLANDER
LANDING SYSTEM
©
on the DJI and make sure that the two
©
.
©
©
Half with Snap Lock locations on Saddle
©
Half at an angle as shown
©
Half as shown.
conform
©